Custom made pendent lamp shade
  • Custom made pendent lamp shade

Custom made pendent lamp shade

€30.00
5 1
,
5/ 5
Tax included
Let us create your custom-build pendent lamp shade with the fabric of your choice!
For more information on these light fixtures, please read the "More info" and "Data sheet" sections below.

Product customization

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • No selected file .png .jpg .gif
Diameter
Height
Quantity
In Stock

100% secure payments

How order your custom made pendent lamp shade?

Step 1 Choose the height and diameter of your future custom made pendent lamp shade
Step 2 Note the dimensions of fabric needed depending on the size selected
Diameter of the lamp shade Minimum width of fabric Minimum height of fabric
20 cm (7.87 in.) 66 cm (25.98 in.)

For height, add 5 cm (2 in.) to the height of the lamp shade

Example: for a lamp shade with a height of 40 cm (15.75 in.), your fabric should have a minimum height of 45 cm (17.75 in.)

22 cm (8.66 in.) 72 cm (28.35 in.)
25 cm (9.84 in.) 82 cm (32.28 in.)
28 cm (11.02 in.) 91 cm (35.83 in.)
30 cm (11.81 in.) 97 cm (38.19 in.)
35 cm (13.78 in.) 113 cm (44.49 in.)
40 cm (15.75 in.) 129 cm (50.79 in.)
The table above shows the minimum dimensions, but you can send us a fabric whose dimensions are larger, we take care to cut off your fabric.
Step 3 Add the lamp shade to cart and place an order
You can pay by credit card, PayPal or bank transfer
Step 4 Send us your fabric
We will provide you the address to send the fabric after confirmation of your payment.
On our side, we will notify you by email of the various stages of your custom lamp (receipt of your fabric, fabrication, shipment, etc.) and we will provide the tracking number allowing you to track your custom made lamp.

Our recommendations for your custom made pendent lamp shade

Fabric type

Please chose smooth fabrics and thin cottons as the weft of the fabric could be transparent when the lamp is turned on.

We do not take silk fabrics.

Patterned fabrics If you want that the pattern is centered in height, consider the 2.5 cm fabric top and bottom necessary.
Meaning of fabric Be vigilant about the meaning of your fabric, if the reasons must be vertical, they are in the height direction. If the reasons must be horizontal, they will be in the width direction.
Your details

You can tell us more details on your application in the "Product customization" section at the bottom of this page or when sending your fabric or by email.

Still have questions? Do not hesitate to contact us at contact@tante-ines.com or via our contact form.

Custom made pendent lamp shade - Product information

Diameter At your convenience, between 10 and 25 cm
Height At your convenience, between 25 and 80 cm
Cord set

Not furnished

Bulb light Not furnished - E26 or E27 light bulb is required according the voltage you use (120 or 240 V)
Table lamp base Not furnished

Light bulbs - Our recommandations

Be sure you have 2-3 inch separation from bulb to shade, especially for higher wattage bulbs.

Our light fixtures need E26 ou E27 light bulb according to the voltage of your country (120 or 240 V).

E26 stands for 26 mm and the E27 for 27 mm in diameter. Those two standards are interchangeable, meaning a E26 light bulb will fit a European E27 base (bulb socket), and E27 light bulb will fit in a E26 base (bulb socket). 

Our light fixtures in your country

Our floor and table lamps are compliant for all countries in the world (except Australia, Brazil and South of Africa). According to your country, we furnish you the right plug (2 pins Euro-plug, 2 pins US-plug or 3 pins UK-plug). Please click here for more information.

In the same, our shades can be used all over the world. If necessary, you can purchase an Uno Adapter to fasten our shades on your lamp bases.

Data sheet

Country of origin
Designed in France and made in France by Tante Ines
Material
Shade : Fabric / Frame : Steel, Epoxy powder coating
Shipping
Our custom made lighting fixtures are delivered to the carrier between three and ten business days
Standards
Meets CE standards
Recommended usage
According your fabric
Dominant color
According your fabric
Satisfaction or your money back
No money back services for our custom made lighting fixtures
  • All our lights are made in France in our workshop in Mayenne. All our lights are made in France in our workshop in Mayenne.
  • The metal and electrical components of our luminaires come from French industry. The metal and electrical components of our luminaires come from French industry.
  • We manufacture and send your orders within a week by French post services. We manufacture and send your orders within a week by French post services.
  • You are not completely satisfied? We take back your order within 14 days. You are not completely satisfied? We take back your order within 14 days.

You might also like